Our innovative 3-way “Y” wrench featuring three different sized wrenches to fit internal spoke nipples. Featuring a square drive, plus 5 mm and 5.5 mm hexes that slip perfectly into the tight surro...
Built and designed for bicycles, the INF-2 utilizes a redesigned, more durable, dual-sided, 360° rotatable Presta and Schrader head. The INF-2 also sports a new, lighter weight body and a redesigne...
The HMR-4 has a fiberglass shaft, a soft touch rubber grip, and a two-sided head — steel on one side and a replaceable plastic head on the other side.
The BBT-90.3 is designed to remove and install the bearings and press fit bearing units used in BB92, Shimano® press fit, SRAM® press fit GXP, Race Face® press fit and other press fit bottom bracke...
Designed and built to install and remove BB30 bearings. The BBT-30.3 features a bushing set used in conjunction with a head cup press to quickly and precisely press the BB30 and PF30 bearings into ...
The HHP-2 accurately aligns and presses 1”, 1-1/8”, 1-1/4”, and 1.5” headset cups. In addition, it presses cartridge bearings and cups into one-piece bottom bracket shells(Fig-1) and holds fixed cu...
The TNS-4 makes it quick and easy to install star-fangled nuts used with 1” and 1-1/8” threadless headset systems. Using a durable steel driver and built-in guide, the TNS-4 perfectly aligns the st...
The CTP-4K includes four (4) replacement chain tool pins and one 5/32" (3.96 mm) ball bearing.
How to replace the chain tool pin:
Unscrew the cap.
Pull out the old pin (Use care not to lose t...
1/4" driver, range: 3-15NM.
Bits: 3/4/5/6/8/10 mm, T20 / T25 / T30, 4 mm-L and 5 mm-L.
The protection inserts have different diameters which allows to work with most of the axles. The inserts should be mounted inside of the vice. In this way it allows you to work safely on the wheel ...
Campagnolo cassette with stabilized pin for QR hub.
Compatible with 24 wrench.
Shimano CS Cassette/Disk Brake Center Lock Remover Use ½” Driver or 21mm Spanner.
Cartridge bottom bracket tool for Shimano cartridge B.B.Use with 24 mm wrench or 1/2" driver.
Set composed of 3 black tire levers.Material: plastic.
For use with Shimano and ISIS drive cartridge bottom bracket.Ergonomic handle.
Professional mechanic tool kit for Shimano use, including 23 items:
- Chain ring nut wrenchFor fixing the bolt of chaing ring- Chain scrubber- Multipurpose Master link toolFor both open and close ...
Freewheel remover for Campagnolo and Shimano threaded cassettes.
This stand for professional use is specially designed for bicycle repair shops. It can be bench-mounted or vise-held.
The calipers enable simultaneous radial control of the wheel posit...
Press-fit bottom bracket removal tool for Shimano PressFit BB bearing removal use, with nominal 24 mm spindle.
The tool makes star-fangled nuts install quick and easy.
Durable steel driver and built-in guide.
Perfectly aligns the star-fangled nut and sets it to the proper depth.
Inner guide d...
It is an ingenious tool for your optimal choice to tune the brake shoes as it is quite handy and practical design.
Works with any width and wheel height profile.
A universal kit that ...
Super B wheel alignment gauge
It is used for the rim to be centered between the locknuts of the hub for a wheel to perform properly. To make precision adjustments, a wheel alignment gauge is a ver...
Tool for Shimano Ultegra, SM-BBR60 and Hollowtech 2 bottom bracket installation
Shimano recommends the use of the tools with TL-FC36
2/2.5/3/4/5/6/8mm hex key wrench, flat/philips screwdriver, T25, 14G/15G spoke wrench for Shimano, spoke wrench for Mavic, tyre lever and chain breaker.Size: 85x45x23mm.Real weight: 207gr.